|
Product
Information
|
|
|
For
Developers
|
|
|
About
Kionix
|
|
 |
Solutions
for Developers
Technical Notes
|
Technical
Note Title |
Contents
|
|
MOUNTING RECOMMENDATIONS |
|
| TAPE & REEL DIMENSIONS AND ORIENTATION OF PARTS | |
|
Hand Soldering DFN Packages (pdf) Additional
Resources: |
Kionix does not recommend hand soldering any of its DFN parts due to the small form factor of the DFN package. It is a distinct possibility that, in doing so, shorts will be created between pins. If hand soldering cannot be avoided, this guide specifies which pins can be shorted without compromising the operation of the accelerometer. (Ideally, none of the pins should be shorted, with the exception of Vdd and PS.) |
|
|
An Excel spreadsheet calculator for determining thresholds and delays |
|
|
An Excel spreadsheet calculator for calculating filter caps. Shows how selected filter caps effect start times. |
Recommendations for sockets (pdf) |
An Adobe file with a list of recommendations for board level accelerometer sockets. Links are provided to the manufacturers. |
|
Kionix posts its most current product information on its official website located at http://www.kionix.com. Off-site, printed material are uncontrolled documents and may contain obsolete information. Please be aware that Kionix communicates all product revisions to its distributors and representatives, and these agents are expected to convey the latest information to customers as a matter of good business practice. Any questions or concerns should be directed to Kionix at info@kionix.com. |
|
