Tri-Axis, 2g, Digital (I²C) Output, 3x3x0.9mm LGA - KXTE9-1026
The KXTE9's advanced orientation-detection feature reports changes in landscape, portrait, face-up, and face-down conditions. This sophisticated embedded algorithm eliminates the need for continuous data collection and complex calculations by a microprocessor. With a few adjustable parameters, the screen-rotation algorithm can be optimized for an intuitive user experience. In addition to orientation detection, the KXTE9 features an activity-monitoring function. This function reports changes in a device's motion state, either moving (active) or not moving (inactive). A highly-manufacturable product with consistent product performance across use conditions, the KXTE9 operates across a supply voltage of 1.8V to 3.6V DC.
These high-performance silicon-micromachined linear accelerometers and inclinometers consist of a sensor element and an ASIC packaged in a 3x3x0.9mm, 10-pin, LGA package. The sensor element is fabricated from single-crystal silicon with proprietary Deep Reactive Ion Etching (DRIE) processes and is protected from the environment by a hermetically-sealed silicon cap at the wafer level.
The sensor element functions on the principle of differential capacitance. Acceleration causes displacement of a silicon structure resulting in a change in capacitance. An ASIC, using a standard CMOS manufacturing process, detects and transforms changes in capacitance into an analog output voltage, which is proportional to acceleration. The sense element design utilizes common mode cancellation to decrease errors from process variation and environmental stress. The voltage is digitized by an on-board A/D converter and is accessed via an inter-integrated circuit (I2C).
- Device Orientation Detection
- Active/Inactive Algorithms
- Ultra Low Power Consumption (30µA full operation)
|Axis||G Range||Sensitivity||Noise (µg/√Hz)||Resolution||Package Size||Pins||Package Type||Interface Output||Wakeup||Operating Temperature (Min.)[°C]||Operating Temperature (Max.)[°C]||Supply Voltage [V]||Current Consumption|
|3||2g||16, (counts/g)||-||8-bit||3x3x0.9mm||10-pin||LGA||Digital (I²C)||No||-40||85||3||20-40 μA|
|IoT Evaluation and Development Kit||Kionix's IoT evaluation kit utilizes hardware platform based on Nordic Semiconductor's Bluetooth LE SoC. The compact (27/32mm x 4.2mm), highly integrated modular sensor system integrates Kionix's accelerometer (KX122-1037), combo accel-mag (KMX62-1031), and combo accel-gyro (KXG07) sensors along with ROHM's barometric pressure sensor (BM1383AGLV). Additional sensors can be evaluated using the add-on board that can fit inside the kit. This enables measurement of 3D acceleration, 3D magnetism, 3D rotation, air pressure, and temperature, making it ideal for training, prototyping, and initial set development of IoT and wearable applications.|